How To Anchor A Trampoline

How To Anchor A Trampoline

If you reside in areas that are susceptible to storms and strong winds, then you should learn how to Anchor a Trampoline. It is important to secure your outdoor equipment before severe weather strikes. How To Anchor A Trampoline

Unfortunately, most people don’t secure their trampolines, and when a strong wind or storm strikes their trampoline gets lifted and transported to far off places.

Of Course, such trampolines are likely to cause accidents or ram into your neighbor’s compound breaking their glass windows or even worse injuring them. 

You May Like This: Best Trampoline Anchors. You should not wait until a storm comes for you to take action, secure your trampoline now. If possible, when you purchase your trampoline ensure that you also buy appropriate anchor kits.

Why Secure Your Trampoline?

1. Protects Life and Property

When you decide to anchor or secure your trampoline, you are not only protecting yourself and family, but others who might get hurt should the trampoline get carried by strong winds.

Unanchored trampolines are a risk hazard and can cause you the unintended expense, should it cause harm to others or even your family. Read Also: Stain For Swing Set

Nobody desires such a scenario, that’s why it’s crucial to anchor and tie-down your trampoline to protect yourself and others from unintended injuries. Knowing how to secure your trampoline correctly should not happen after severe damage has already occurred.

2. Peace of Mind

Anchoring your trampoline will give you peace of mind. Knowing that your trampoline is well-rooted, whether you are indoors, or on vacation, you will remain at ease in the face of a storm.

You will be sure that everything is in order in your compound, you’ll not get cases of injuries or flying trampolines.

3. Saves You Money and Time

When you correctly secure your trampoline, it’s rare that it will hurt anyone or damage anyone’s property. Read Also: Stain For Cedar Swing Set.

Also, anchoring trampoline will save you from making a new purchase since strong winds and storms are unlikely to destroy it.

How To Anchor A Trampoline – Step By Step Guide

Two different methods can be used to anchor a trampoline: Use of wind stake and Use of purchased trampoline anchors. 

Method 1: Use Of Stake To Anchor A Trampoline

You Will Need – Concrete, Shovel, Hammer, and Tape measure. 

Step 1 – Identify where you’ll want your trampoline located. Place the trampoline in that location so you can mark the positions of the legs.

Step 2- After correctly marking the leg positions, move your trampoline so you can get working space.

Step 3 – Using the shovel, dig holes in the locations you had marked; ensure that the holes are narrow and broad enough.

Step 4 – Put your wind stakes on the holes, attach the legs of the trampoline, and then pour the concrete. Smooth the concrete appropriately.

Cover with gravel or wood chips and allow it to dry for at least 24 hours before allowing kids to play on it.

Note: This method is considered a permanent one, so if you intend to move houses in the future, it is not the ideal method for you.

Also, this technique is not highly recommendable by experts because when strong winds or storm strikes it’s likely that the legs of the trampoline will pull away from the cement and still cause damage.

It is advisable to use anchoring kits that are made to hold the trampoline down. These wind anchoring kits if well installed have low cases of pulling away or letting the trampoline pull off.

Method 2: Use Of Purchased Trampoline Wind Anchors  

The use of trampoline anchor kits is considered the ideal way of anchoring a trampoline.

These anchoring kits contain durable spiral steels that help to hold the trampoline down, so they don’t get destroyed when harsh weather conditions strike.

As a homeowner, you may want a trampoline anchor kit that’s dependable, and one that will keep you at ease in case lousy weather strikes.

These anchors are easy to install, and they come with comprehensive instructions, so you get to save time assembling them. Read Also: Swing Set Under 200.

First, we’ll discuss the steps you need to follow when anchoring your trampoline, and then we’ll recommend some of the best trampoline anchor kits available on amazon.com.

Steps To Follow When Anchoring Trampoline Wind Anchors 

Step 1 – Go through this guide, click, and order an anchoring kit that you feel is ideal for you. 

The decision you make should be dependent on the type of soil in your compound, the size of your trampoline, and the level of wind or storm in your area.

Step 2 – Select an appropriate location where the trampoline will be set up. Mark the position of each leg, dig deep holes, and Twist the anchors for several inches into the ground.

Or you can place the anchors on the legs of the trampoline. The installation route you take will depend on the manufacturer’s instructions.

If the kit didn’t come with instructions, get a strap that will help connect the anchor to the trampoline frame. For good results, Ensure that you Strap each leg to its corresponding anchor.

Step 3 – Place the anchor on the holes you had dug and twist them several inches into the ground. Wrap each trampoline leg with a strap, before attaching it to the anchor.

You can also secure all the straps using the hooks attached to the trampoline frame as well as one of the screw holes of the ground anchor.

Step 4 – Bolt or screw all the anchors into the ground, then, carefully adjust all the straps to attain the same tension.

Step 5 – After you’ve secured the trampoline legs to the ground, you should also protect your trampoline’s disk. Read Also: Swing Sets for Small Yards.

It is common to see the disk or upper part of the trampoline detach from the legs, notably if the set-up was permanent.

Step 6 – You’ll need to secure the frame of the trampoline using ratchet straps; these straps will help to safeguard the upper part of the trampoline from detaching itself.

First, get pointed stakes (pickets) and insert them into the ground near the perimeter of the bouncing surface.

Now, wrap those ratchet straps via the frame of the trampoline and the pickets, this way you’ll make a better and stable anchor that will protect your trampoline.

Similar Posts