Pest Policy: Your Guide to Home Improvement

Special epoxy ( two-part�epoxy ) is the best for garage floors - but give it a thin and well-mixed application. The garage floor paint will allow a great home upgrade - eases cleaning and removes any gunk. Particularly, oil stains tend to seep into the porous concrete and thus result in some slick residue - picking up dirt. You may use latex paint it is cheaper but less durable and less chip resistant. Many garages are abused and neglected - some with excessive dirt, and oil spills. But an amazing garage will be a great room for a car and outdoor equipment crib, other storage, and a workshop. See Also: Fixing peeling paint on drywall ...

Metal structures and buildings are emerging trends in the construction industry. Whether the building is temporary or permanent, painting is paramount in creating an impressive outlook and adding aesthetic value in the vicinity. On how to paint a metal building - select materials and tools required, strip old paints and rust (if any), prep the surface, select and prepare the primer, apply primer, select and prepare finish paint, and apply the final coat before leaving it to dry naturally. Further, you must match the undercoat paint with the right primer to avoid peeling and chipping, which is common due to poor application method. For safety purposes, consider wearing the protective gears and adhere to precautions given in this article during paint application. ...

Have you ever considered painting your metal interior door freshly? Door painting is necessary as it will not only improve the overall service life but also boost the aesthetic impression. Often, homeowners face challenges when coating metal interior door, especially while selecting the paint and prepping the surface. Undertaking wrong painting procedure and paint preparation has always led to peeling, chipping, and scuffing. Could you be facing similar problems? On how to paint a metal interior door, choose the right tools and material, remove the door and hardware (if not fixed permanently), clean the door with a degreaser, and remove old paints before sanding the surface. Further, select and prepare the primer as per the manufacturers instructions, gently apply the primer, select and prepare the finish paint, apply to finish paint intermittently to achieve quality stickiness, and leave the door to dry naturally before replacing the hardware and fixing it back.� Notably, wear the protective gear for safety purposes and consider a professional painter in case you are new to painting activity. Remember, quality paint finish is a function of adherence to instructions and procedures given in this article.� ...

Stairwell painting may not be easy, especially when the wrong procedure or paint selection is engaged. Low-quality paint or inappropriate painting procedure leads to peeling and scuffing with time. Could you be facing similar challenges? On how to paint a stairwell - select the tools and material required, clean the surface, strip old paint, sand the surface, and fill & repair damaged sections before final polishing.� Besides, you must select the right primer and prepare it accordingly, apply the primer, select and prepare finish paint, apply to finish paint, and undertake quality coat finish. You will also need to cover unwanted sections (to prevent staining) and prioritize painting handrails before coating the stairwell. ...

Owning a classic painted wall is crucial in improving the aesthetic finish outlook of interior painting or exterior wall. Painting a wall with a brush may be challenging, especially when the wrong paintbrush is used for a particular wall surface. Proper use of a brush is necessary in order to attain an excellent paint finish. Could you be planning to paint your wall using a paintbrush and wonder how to go about it? Well, in this article, I will be discussing how to paint a wall with a brush. To begin with, you will need to select the right paintbrush for walls, prepare the wall surface, prepare the paint before loading the paintbrush sufficiently. Further, apply the paint gently, smoothen the finish, and clean the paintbrush before storing. Besides, its important to wear protective gear and adhere to health precautions given to prevent any hazard that may occur. Remember, proper paint selection and preparation is paramount towards attaining the best wall paint finish.� ...

Aluminium boats are great for fishing as they’re durable and lightweight. But, sometimes, they may get abused or overused. So, in this post, I’ll take you through how to paint an aluminium boat (step by step). A new paint coat on the aluminium boat will give a new life. We’ll help you (affordably) change your abused, neglected, and ugly aluminium boat to look like gel-coated fibreglass ready to go fishing for many years. Below I’ve outlined the detailed steps of painting an aluminium boat to (hopefully) make your boat-painting project much more straightforward. Luckily, with the correct formula, you won’t need professional shipwright or expert painters . To paint your aluminium boat Sand off the boat surface, scrub and pressure-wash the aluminium off contaminants and dust, apply the primer, paint about two paint coats, apply a clear coat once the coats are cured, and finally apply the anti-fouling paint.� ...

Painting bathroom cabinets is a simple and cost-effective way to update the look of your bathroom without having to replace the entire cabinet. Whether you are dealing with outdated finishes or simply want to give your cabinets a fresh, new look, painting can completely transform the space. In this guide, we will walk you through the steps to paint bathroom cabinets effectively, as well as tips for getting a smooth and durable finish. ...

Perhaps you own a brick home or a wall structure and you intend to improve it’s outlook impression, then, painting is the best option to consider. Wrong procedure and painting method cause paint to peel or chip with time upon application. On how to paint brick; select appropriate tools and materials required, clean the brick surface, strip old paint, sand the surface, repair damaged sections, and polish the surface before rinsing it to dryness. *In addition, you’ll have to select and prepare primer (follow manufacturer’s instructions), apply the primer, select and prepare finish paint, apply finish paint, and undertake quality finish touch before leaving the surface to dry naturally. * ...

Having an impressive concrete outlook is the dream of every homeowner. However, achieving an excellent paint finish is usually faced with several challenges, especially when the wrong procedure is used while painting. Perhaps you are facing peeling challenges or even mold growth over your concrete surface and wonder how to go about it. Do you just coat the concrete with paint, strip, or wash the entire surface? Well, in this article, we shall be discussing how to paint concrete. You begin your task by selecting appropriate tools/materials, carry out surface preparation, seal/fill any surface damage, sand/polish where necessary before applying a concrete-based primer, if necessary. Moreover, choosing correct concrete paint and prepare accordingly, carry out a procedural application with a roller, a paintbrush, or a paint sprayer, and then leave the concrete surface to dry naturally or in an agitated atmosphere. Indeed, the concrete finish coat shouldnt be touched when still wet or sanded whatsoever after the paint has dried.� ...

Painting cabinets is a common activity carried out during paint restoration or new coat application in homes of commercial places. Whether its a kitchen cabinet or a wardrobe, sanding affects the finish outlook upon paint application, especially the case of the laminate wood. Could you be facing similar challenges and wonder how to paint your cabinet afresh or restore old paint? On how to paint kitchen cabinets without sanding, select the right material and tools, detach cabinet drawers and doors, clean the entire cabinet, select the right paint, and prepare it accordingly.� Further, carry out actual painting step by step, attain a classic final finish before fixing back the cabinet drawers and doors. Put on proper protection gear during paint application to boost your safety and avoid any hazards. See Also:� stain for your swing set . ...